Pevac Road Blockers
EFFECTIVE PROTECTION AND FLEXIBLE REGULATION
Regulate traffic or increase security with these Road Blockers. Opening and closing (and vice versa) of bus lanes, car parks and the protection of buildings and establishments has never been safer or easier.
In its lowered position the Road Blocker is almost invisible, in its raised position it obstructs traffic.
The Road Blocker is supplied complete with concrete foundations so that it can easily be installed in the road surface. Thanks to its solid construction, in its lowered position, the Road Blocker does not present any problems to heavy goods vehicles (traffic class 60).
- Used globally
- Crash test-certified (optie)
- Designed for various threat levels
- Inconspicuous or high security
Available in electrically or hydraulically powered versions
Standard model or certified in compliance with the U.S. DOS rating (K4-K8-K12) or de E.U. PAS-68 (tot 7500 kg @ 80kph)
Height 300 – 650 – 800 – 1000 mm
Lenght 2000 – 2500 - ….. – 5500 – 6000 mm
Raising / lowering speed 4-6 secs.
EFO-system speed < 2 sec.
Galvanised and provided with a double-layer powder coating
Integrated or external controls
Pre-fabricated concrete foundations (optional)
Integrated lighting (optional)
Height: 300 mm-650 mm-800 mm-1000 mm.¬
Width: 2000 mm-2500 mm-3000 mm-3500 mm-4000 mm-4500 mm-5000 mm-5500 mm-6000 mm.
Tray and frame
Foundation made of steel (4mm). Steel frame composed of IPE140 including rebars. Concrete C45/55. Hot dip galvanized according to NEN-EN-ISO 1461. Foundation frame of angle steel 200×100 mm IPE 106. Blocking element.
PAS68 according to FEM simulation (similar to K12 or certificate). (optional). Axle load in down position: 200 kN – up position: 100kN (static). Traffic Class 60.
Fundatieframe van hoekstaal 200 x 100 mm IPE 160. Blokkeerelement.
Blocking element 300 mm high
Steel tube Ø 114 mm. Tube 160 x 80 mm. Cover of durbar plate 8/10 mm. Front panel of 5 mm of rolled steel. Axle load in down position: 200 kN – upward position: 100 kN (static). Traffic Class 60.
Blocking element 650 mm and higher
Steel tube Ø 160 mm, IPE 140 and 140 UNP. Cover of durbar plate 10/12 mm with stripping block. Front plate of 5 mm rolled steel. Equipped with plain bearings (Stainless steel and high-grade plastic).
Electromechanical drive by 1 motor (0.75 or 1.1 kW), IP 56. Junctionbox mounted in the foundationframe. End Contacts: 2 inductive proximity switches. Emergency operation provided in the foundationframe, 3-pole switch in the foundationframe for motor and power supply. Emergency operation (pendulum). Speed: 4-6 sec.
Option: available in hydraulic version with E.F.O. (Emergency Fast Operation: 1-2 sec).
Steel grit blasted SA 2½-3, zinc metalized 30μm, 2 layer polyester powder coat, 120μm
total. Blocking element, cover plates RAL 9005 (black). Diagonal stripes RAL 1023 (Traffic Yellow).
Other finishes, colours and extreme environmental protection available.
Locking standard, including impact mechanism. (only Roadblocker 650 high).
Optional: magnetic loop, traffic lights, icons, stop line on road, acoustic signal.
Submersible 230 Vac. Hydraulic version.
THE PEVAC ROAD BLOCKERS ARE USED IN
HIGH SECURITY SITES