EFFECTIVE PROTECTION WITHOUT HINDRANCE TO ROAD-USERS AND WITH A SLEEK APPEARANCE.
For temporary and effective closure of car-parks, premises, open spaces or shopping areas, these bollards can be put to widespread use. An easy-to-operate, reliable and vandal-proof access control.
Certain types have been designed as anti-ram bollards for the protection of doors and shop fronts. These kinds of bollards are frequently used to protect buildings.
For this reason, our bollards are also available with the required certificates to provide added assurance.
- Used globally
- Crash test-certified (optie)
- Designed for various threat levels
- Inconspicuous or high security
Available in electrically or hydraulically powered versions
Standard model or certified in compliance with the U.S. DOS rating (K4-K8-K12) or de E.U. PAS-68 (tot 7500 kg @ 80kph)
Height 600 – 800 – 1000 mm
Diameter 220 – 275 mm
Raising / lowering speed 4-6 secs.
EFO-system speed < 2 sec.
Galvanised and provided with double layer powder coating
Integrated or external controls
Pre-fabricated concrete foundations (optional)
Stainless steel (optional)
Integrated lighting (optional)
Ø 220mm x 4,5 mm, 600 mm (h). Conduction by means of axis on thei inside (Axial Glide System®) and wheels on the outside. Traffic Class 60. Colour: RAL 9005. Reflection Sticker: Red (retro-reflective).
Tray and frame
800 (l) x 500 (w) x 1000 (d) mm, 5 mm steel sheet, bottom 10 mm. Frame: 15 mm steel sheet. Durbar plate: 10/12 mm. Colour: RAL 9005. Other colours on request.
PAS68 according to FEM simulation (similar to K12 or certificate). (optional). Axle load in down position: 200 kN – up position: 100kN (static). Traffic Class 60.
Electromechanical with 1 motor controlled by intelligent inverter. Motor: 0.75 kW, 230V, 50Hz, IP66. End switches: 2 inductive proximity switches, 24Vdc. Emergency Operation: manual by using a special emergency opener.
Steel grit blasted SA 2 ½ – 3, zinc metallized 30 μm. 2 layer powder coat, 120 μm total. Tray and frame: galvanized according to NEN-EN-ISO 146.
HTC SmartPrint microprocessor control panel with frequency converter 0.75 kW, range of
programme options. Multiple input/output connections, safety circuit control boards. Power
requirements – 230 Vac single phase, 16 amp. (or PLC unit).
Optional: icons, stop line on the road surface, acoustic signal, photo cell poles on both sides of the bollard (necessary for TÜV certification).
Loop detector receivers for mounting PCB
2 channel. Suitable for connection to Smart Print. Frequency range 30-130 kHz, sensitivity 0.01% – 0.65% (Df/f), max length loop connection 100 metre, response time 80 ms, release time 40 ms.
Loops in the concrete / asphalt
Position: one in front and one behind the bollard at a distance of about 750 mm. Maximum loop length: 5m, 2m range.
LED traffic lights
2 lenses, Ø 80 mm, red and green. 230 Vac (controlled by Smart Print). Optional: external LED traffic light in a box.
Can be carried out optionally by a submersible pump 230 Vac.
THE PEVAC BOLLARDS ARE USED IN
HIGH SECURITY SITES